Click on the image to view the larger image.
Prompt information
Intelligent LED daylight lamp hawk eye lamp controller
Constant light + dimming + delay + automatic switch
Realize when the car started (voltage must be higher than 13 V +), automatic line lamp lights, when open the headlamps (or reading lamp), day light obscuration (darker), when the car stall (voltage must be below 12.5 V), 15 seconds delay line lights lamp!
Warm tips: after the battery is connected, the lamp will be on for about 15 seconds, and the lamp will turn off again. It is a normal phenomenon (realizing the delay function). After that, you need to start the car.
Product scope of application
1. The starting voltage is 13V+, and the extinguishing voltage is lower than 12.5v (if above, it will be extended for several minutes until the voltage drops down).
2. 1 the total power of a pair of day-lamp shall not exceed 18W (the total power of most day-lamp shall not exceed)
Connection mode:
1. First connect the positive and negative poles of the left and right helix lamps
2. Connect the input end red line and black line on the controller to the positive and negative terminals of the battery, the output end red line and the black line to the positive and negative terminals of the day lamp
3, the yellow line on the controller meets the headlight switch the anode (or reading lamp), when open headlight or reading lamp, lamp brightness is half day (darker), light reduction functions (yellow line can choose not to pick up, by giving up this functionality, do not affect other use)
Intelligent work:
Voltage when start the car engine to 13 V +, day light automatically on the lamp, when the car stalled, voltage below 12.5 V (not suitable for car stalled after the voltage is higher than 12.5 V), the day will delay destroy the light automatically after 15 seconds, facilitate lighting home owners, implementation delay destroy lamp features!